Informational Videos
Explore our videos to learn how our tiling leveling systems simplify installation and save you time.
Installation Videos
Explore our installation videos for clear, step-by-step guidance on using our tile leveling systems effectively.
Frequently asked questions
Will “Leveling Spacers™” work on walls?
Yes, they work great on wall tile. For removal, just use a white rubber mallet (or something similar) to strike them. Be sure to strike them on the thin side of the leveler piece in a motion that follows the grout joint where they are installed. They will easily break free.
Do I need to remove the wedges before breaking the pieces loose?
No, in fact it is much faster and easier to leave them in. The wedges will automatically separate themselves, during the break-off process.
What is the maximum distance you recommend between levelers?
We recommend no more than 24” between levelers on the extra large tiles. Of course, depending on the size of the tile, and the softness of your thinset, you may decide to use them more often.
Do I still need a “Large Format Style” thinset?
We would never recommend going a step down in a specified thinset, but if the only reason you are using the “Large Format Style “ thinset is to hold the tile in place, then it makes sense that it would work. You must always be sure the thinset mortar used bonds properly to the substrate, is suitable to bond to the back of the tile, and is appropriate for the type of movement expected. Back buttering of the tiles is always recommended for larger tile, but not because of our system, it is because the industry recommends back buttering of large tiles in any installation. Of course the goal is 80-100% coverage of thinset (depends on the tile type and expected use), so however you get there is fine.